Search
Insert the text you want to search and press enter to perform the search
Home > Turned Bars

Turned Bars

Barras calibradas

Sidenor’s Turned Bars are used to manufacture all types of parts for the automotive, construction, mechanical engineering and energy industries and industry in general where a dimensional precision and finish is required. This surface condition could be applied to any steel family: free-cutting, carbon, alloyed, etc…. with or without any types of thermal treatments: quenched, annealed, spheroidized annealed, stress-relief, etc… based on the product requirements.

Sidenor Special Steels:
  • Supply dimensions: 20 – 100 mm h10 or greater h9 and 100 – 220 mm h12
  • Lengths from 3,000 to 9,000 mm per/thermal treatment.
  • The turned bars may be supplied: without thermal treatment – stress relieved – annealed(sub critical, spheroidizing, isothermal) – normalized – quenched and tempered (conventional and induction) – hyper tempered (stainless steels).
  • End of the bars: possibility of beveling/facing/shearing/sawing.
  • Material 100% controlled by circograph.
  • Internal defects: we guarantee compliance with SEP1920 class C standards; EN 10.228-3 class 4; SAE-AMS-STD-2154 class B; OENORM-M3002 class 3; SEP1921 class Ee; EN 10308:2002.
  • Stricter requirements are available upon request.
Sidenor Bright Steels:
  • Supply dimensions: from 10mm to 80mm in diameter.
  • Tolerance h9/h10/h11 in lengths from 2,800 to 7,000mm.
  • The bars may have 1 and/or 2 beveled/facing ends.
  • Straightness between 0.5mm/m-2mm/m as specified. Package weight 1,000Kg/1,500Kg.
  • Material 100% controlled by circograph.
  • European standard EN 10277-1 and customer specifications.
  • Internal defects: we guarantee compliance with SEP1920 class C standards; EN 10.228-3 class 4; SAE-AMS-STD-2154 class B; OENORM-M3002 class 3; SEP1921 class Ee; EN 10308:2002.
  • More severe requirements are admitted upon consultation.