Sidenor’s Drawn Wires are used to manufacture clamping pieces such as screws, grub screws, rivets and other products such as bearing balls.
Processes:
- Simple K (Euronorm +U+C)
- Reduced GKZ+K (Euronorm +U+AC+C)
- Complete K+GKZ+K (Euronorm +U+C+AC+LC)
- Alloys GKZ+K+GKZ+K (Euronorm +U+AC+C+AC+LC)
Steel lines:
- Alloyed 41Cr4, 41CrS4, 42CrMoS4…
- Boron: 20MnB4, 23B2, 36MnB4, 35B2…
- Carbon: C4C, C10C, C15C, C20C…
- Bearings: 100Cr6
Surface state:
- Pickling
- Phosphate
- Reactive Soaped
| Ø wire (mm) | Ø (mm) interior | Ø (mm) exterior | Weight (Kg) | |
|---|---|---|---|---|
| Roll | 5 – 10 mm | 500 mm | 950 mm | 750/1,500 |
| 10 – 38 mm | 800 mm | 1,250 mm | 750/1,500 | |
| Frame | 1.5 – 3 mm | 520 mm | 950 mm | 300/500 |
| 3 – 9 mm | 520 mm | 950 mm | 500/750 | |
| 9 – 11.70 mm | 520 mm | 950 mm | 500/750 | |
| 750 mm | 1.100 mm | 750/1,500 | ||
| 11.70 – 15 mm | 750 mm | 1,100 mm | 750/1,500 |